How to Program Your Chevy Key Fob

 
If you’ve just purchased a new Chevrolet truck or SUV, and you’re wondering how to program a Chevy key fob, you came to the right place. The team at Standard Motors in Swift Current is here to help you get the most out of your Chevy key fob. Check out the following step-by-step instructions for Chevy key fob programming, and if you have any questions, please feel free to contact us.
 

Chevy Key Fob Programming: A Step-by-Step Guide

1. Manually unlock your car door using your Chevy key.
2. Make sure that all of the car doors are fully shut, and then insert the key into the ignition, but do not start the car.
3. Press and hold the unlock button on the driver’s side door, and then turn your key to the “On” position without starting the vehicle. The interior lights and radio will come on.
4. Turn the key back to the “Off” position, and turn it to “On” and “Off” once again in quick succession (On – Off – On – Off).
5. Release the unlock button.
6. Once you’ve released the unlock button, you should hear the door locks cycle. This tells you that the programming sequence can begin.
7. On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons at the same time until you hear the door locks engage and disengage again to indicate that you have successfully programmed your key fob.
8. Re-insert the newly programmed key into the ignition and turn it to the “On” position to end the programming sequence.

These simple steps will help you program the Chevy key fob on your Silverado, Equinox, or Malibu. If you get stuck along the way, stop by our Service Centre near Regina. Our certified technicians will be happy to assist you with your Chevy key fob programming.

Where Can I Get a Chevy Key Fob Replacement?

If you need a new Chevy key fob, stop by our Saskatoon-area Parts Centre. We’ll make sure you get the Chevy key fob replacement that’s right for your specific Chevy model. We carry a wide range of genuine Chevrolet OEM parts, including Chevy key fob replacements. You can order parts from us online, and we’ll give you a call when they are ready to be picked up.

Get Chevy Key Fob Programming Help at Standard Motors!

Whether you need a little help learning how to program your Chevy key fob, how to check tire tread, or how to jump start a car, you can rely on the experts at Standard Motors. You’ll find that our parts team and service professionals are dedicated to ensuring that your Chevy is always running safely in top condition. Make sure to check out our parts specials and current service coupons to take advantage of some of the best deals in the Kyle area.